Home>Products>CAT injector>CAT 10R7225 injector
CAT 10R7225 injector
category
CAT injector
CAT 10R7225 SPECIFICATIONS
Offer BVC Pump Valve Co., Ltd. High Quality Brand CAT 10R7225 injector .Contact 1.875 Inch | 47.625 d Us Online to Get Best Quote.
- CAT
10R7225
- 30.0 LB
- Flange Mount
- Right Hand (CW)
- V2010-1F11S6S-11CC12
- 1 1/2
- Flange
- N/A
- N/A
-
BVC Pump Valve Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CAT 10R7225 injector Cross reference
- 0.875 in
- 13 Tooth Splined
- V2010
- 1 5/16 in
- Buna-N
- 2500
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 2500
- N/A
- 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- V2010-1F11S6S-11CC12
- 2200
- 2500
- 9
- 16.5
- N/A
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.19
- 2.22
CAT 10R7225 Specifications for CAT 10R7225 injector
Frequently bought CAT 10R7225 injector together | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | D | B | C | d | S | Fw | C0 | Size |
TAFI 557225 | IKO | 72 mm | 25 mm | 47,5 kN | 55 mm | 0,5 mm | 60 mm | 103 kN | 55x72x25 |
TAF 607225 | IKO | 72 mm | - | 47,5 kN | 60 | - | 60 mm | 103 kN | 60x72x25 |
RLM607225 | NSK | 72 mm | - | 50 kN | 60 | - | 60 mm | 99,5 kN | 60x72x25 |
722510DA | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722510DB | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722511DA | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722511DB | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722512DA | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722512DB | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722513DA | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
722515A | PT INTERNATIONAL | - | - | - | - | - | - | - | - |
CAT 328-2586 injector | GPM @ 1,800 rpm, Shaft End:30.0 LB; Weight:Flange Mount; Major Diameter [Min:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F11S6S-11CC12; Shaft End Flow @ RPM:1 1/2; Manufacturer Part No.:Flange; Max. RPM [Max:N/A; Port Orientation - Cover End:N/A; Minor Diameter:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 238-8901 injector | Cover End RPM [Max:30.0 LB; Controlled Flow Rate:Flange Mount; Seal Material:Right Hand (CW); Shaft End Pressure [Max:V2010-1F11S6S-11CC12; Shaft Length:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Rotation:N/A; Port Orientation - Cover End:N/A; Max. RPM [Max:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 269-1839 injector | Pressure Port Size, Cover End:30.0 LB; Cover End RPM [Max:Flange Mount; Rotation:Right Hand (CW); Shaft Type:V2010-1F11S6S-11CC12; Model No.:1 1/2; Minor Diameter:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Weight:N/A; Port Size:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 328-2585 injector | Shaft Key:30.0 LB; Port Size:Flange Mount; Shaft Type:Right Hand (CW); Shaft Seal Type:V2010-1F11S6S-11CC12; Shaft End RPM [Max:1 1/2; Spline Description:Flange; Port Orientation - Cover End:N/A; Shaft End Flow @ RPM:N/A; Pilot Type:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 387-9430 injector | Shaft End RPM [Max:30.0 LB; Relief Valve Setting:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pump Series:V2010-1F11S6S-11CC12; Minor Diameter:1 1/2; Seal Material:Flange; GPM @ 1,800 rpm, Cover End:N/A; Pressure Port Size, Cover End:N/A; Integral Valve Configuration:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 243-4502 injector | Cover End RPM [Max:30.0 LB; Cover End Pressure [Max:Flange Mount; Seal Material:Right Hand (CW); Port Orientation - Cover End:V2010-1F11S6S-11CC12; Spline Description:1 1/2; Pressure Port Size, Shaft End:Flange; Integral Valve Configuration:N/A; Relief Valve Setting:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Model No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 10R-7225 injector | Pump Series:30.0 LB; Mounting Flange:Flange Mount; Mounting:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F11S6S-11CC12; Weight:1 1/2; Controlled Flow Rate:Flange; Port Size:N/A; Max. RPM [Max:N/A; Shaft Length:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 387-9428 injector | Controlled Flow Rate:30.0 LB; Shaft Length:Flange Mount; Weight:Right Hand (CW); Pump Series:V2010-1F11S6S-11CC12; Shaft Seal Type:1 1/2; Port Size:Flange; Model No.:N/A; Spline Description:N/A; Shaft End Flow @ RPM:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 241-3239 injector | Shaft Key:30.0 LB; Rotation:Flange Mount; Minor Diameter [Max:Right Hand (CW); Manufacturer Part No.:V2010-1F11S6S-11CC12; Seal Material:1 1/2; Relief Valve Setting:Flange; Cover End Pressure [Max:N/A; Mounting Flange:N/A; Weight:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 387-9427 injector | Displacement Cover End (cu in/revolution):30.0 LB; Relief Valve Setting:Flange Mount; Spline Description:Right Hand (CW); Seal Material:V2010-1F11S6S-11CC12; Pump Series:1 1/2; Port Size:Flange; Major Diameter [Min:N/A; Rotation:N/A; Shaft End RPM [Max:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
CAT 10R7225 injector Video
Contact Us
![](https://diecastminicars.com/uploaded_images/5510.jpg)
- BVC Pump Valve Co., Ltd.
- AddressZona Industriala-Vest, 5 Strada Salzburg, 25 00 SIBIU, Romania
CAT 10R7225 Technical Articles
Does a hydraulic pump create pressure or flow? |
What does a case drain do on a hydraulic motor? |
Why might a pump be needed in a hydraulic system? |
CAT injector CATEGORIES
- Rexroth check valve
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- Danfoss Shut-off valves
- Rexroth Vane pump
- Yuken Double Vane pump
- DENISON vane pump
- Yuken pressure valve
- PAKER Piston Pump
- CAT injector
- BOSCH injector
- DEUTZ injector
- CUMMINS injector
- DENSON injector
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump