Home>Products>CAT injector>CAT 10R7596 injector
CAT 10R7596 injector
category
CAT injector
CAT 10R7596 SPECIFICATIONS
What is CAT 10R7596 injector in mechanical BVC Pump Valve Co., Ltd. engineering? N/A Minimum Buy Quantity CAT injector Manufacturing Service . Upload your CAD file for an instant. 0080067519882 EAN
- CAT
10R7596
- 101.0 LB
- Flange Mount
- Left Hand (CCW)
- 4525VQ60A14-11AA20-LH
- 3 1/2
- Flange
- N/A
- Standard Pilot
-
BVC Pump Valve Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CAT 10R7596 injector Cross reference
- 1.25 in
- 14 Tooth Splined
- 4525VQ
- 1 15/16 in
- Buna-N
- 2200
- 1.04 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 2200
- 2200
- N/A
- 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
- 1.248 in
- 1.247 in
- N/A
- N/A
- N/A
- 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
- 4525VQ60A14-11AA20-LH
- 3000
- 2500
- 21
- 90
- w/o Integral Valves
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1 in Flange
- 1 1/2 in Flange
- 2.77
- 11.8
CAT 10R7596 Specifications for CAT 10R7596 injector
Frequently bought CAT 10R7596 injector together | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | D | Width | Weight | Length | Casing | width: | Industry | Division |
507596 | FAG BEARING | - | - | 89.3 | - | - | - | - | - |
29502-7596 | Garlock | 5.3540 in | - | 0.27 lb | - | - | 0.7500 in | - | - |
29602-7596 | Garlock | 5.3540 in | - | 2.42 lbs | - | - | 0.7000 in | - | - |
417596 | Timken National Seals | - | 0.562 in | 1.35 lbs | - | With Inner Case | - | - | - |
1C075962 | Donaldson | - | - | - | - | - | - | - | - |
1C075962-17 | Donaldson | - | - | - | - | - | - | - | - |
PF7596 | Baldwin | - | - | - | 2 3/32 (53.2) | - | - | Automotive Heavy-duty on-highway transportation Commercial trucks and buses Agriculture Construction Industrial Marine Mining Oil & Gas Power Generation Locomotive | Engine Mobile Aftermarket |
R900357596 | Bosch Rexroth | - | - | - | - | - | - | - | - |
CAT 387-9427 injector | Cover End RPM [Max:101.0 LB; Weight:Flange Mount; Shaft Length:Left Hand (CCW); Controlled Flow Rate:4525VQ60A14-11AA20-LH; Major Diameter [Max:3 1/2; Major Diameter [Min:Flange; Pressure Port Size, Cover End:N/A; Pressure Port Size, Shaft End:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 10R-7225 injector | Spline Description:101.0 LB; Major Diameter [Min:Flange Mount; Mounting Flange:Left Hand (CCW); Port Orientation - Cover End:4525VQ60A14-11AA20-LH; Port Type:3 1/2; Shaft Seal Type:Flange; Port Orientation - Shaft End:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Integral Valve Configuration:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 243-4502 injector | Pressure Port Size, Cover End:101.0 LB; Shaft Dia.:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Orientation - Shaft End:4525VQ60A14-11AA20-LH; Spline Description:3 1/2; Rotation:Flange; Mounting Flange:N/A; Major Diameter [Min:Standard Pilot; Relief Valve Setting:1.25 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 328-2586 injector | Shaft Key:101.0 LB; Cover End Flow @ RPM:Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Dia.:4525VQ60A14-11AA20-LH; Pump Series:3 1/2; Shaft End Pressure [Max:Flange; Max. RPM [Max:N/A; Minor Diameter [Min:Standard Pilot; Port Orientation - Shaft End:1.25 in; Weight:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 387-9430 injector | Major Diameter [Max:101.0 LB; Spline Description:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Displacement Shaft End (cu in/revolution):4525VQ60A14-11AA20-LH; GPM @ 1,800 rpm, Cover End:3 1/2; Cover End RPM [Max:Flange; Max. RPM [Max:N/A; Model No.:Standard Pilot; Shaft Seal Type:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 328-2585 injector | Model No.:101.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Size:Left Hand (CCW); Controlled Flow Rate:4525VQ60A14-11AA20-LH; Shaft Type:3 1/2; Relief Valve Setting:Flange; Pump Series:N/A; Minor Diameter:Standard Pilot; Mounting:1.25 in; Shaft Dia.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 387-9428 injector | Cover End Pressure [Max:101.0 LB; Rotation:Flange Mount; Port Size:Left Hand (CCW); Port Orientation - Cover End:4525VQ60A14-11AA20-LH; Seal Material:3 1/2; Port Type:Flange; Pressure Port Size, Cover End:N/A; Max. RPM [Max:Standard Pilot; Manufacturer Part No.:1.25 in; Integral Valve Configuration:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 238-8901 injector | Port Orientation - Cover End:101.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Pressure Port Size, Shaft End:4525VQ60A14-11AA20-LH; Port Size:3 1/2; Max. RPM [Max:Flange; Major Diameter [Max:N/A; Cover End Pressure [Max:Standard Pilot; Controlled Flow Rate:1.25 in; Mounting:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 241-3239 injector | Displacement Cover End (cu in/revolution):101.0 LB; Spline Description:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Cover End Flow @ RPM:4525VQ60A14-11AA20-LH; Mounting:3 1/2; Shaft Dia.:Flange; Seal Material:N/A; Shaft Key:Standard Pilot; Major Diameter [Min:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 269-1839 injector | Port Type:101.0 LB; Port Size:Flange Mount; Mounting:Left Hand (CCW); Pressure Port Size, Shaft End:4525VQ60A14-11AA20-LH; Controlled Flow Rate:3 1/2; Port Orientation - Cover End:Flange; GPM @ 1,800 rpm, Cover End:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Port Orientation - Shaft End:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A14-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):2.77; Displacement Shaft End (cu in/revolution):11.8; |
CAT 10R7596 injector Video
Contact Us
![](https://diecastminicars.com/uploaded_images/5510.jpg)
- BVC Pump Valve Co., Ltd.
- AddressZona Industriala-Vest, 5 Strada Salzburg, 25 00 SIBIU, Romania
CAT 10R7596 Technical Articles
Does a hydraulic pump create pressure or flow? |
What does a case drain do on a hydraulic motor? |
Why might a pump be needed in a hydraulic system? |
CAT injector CATEGORIES
- Rexroth check valve
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- Danfoss Shut-off valves
- Rexroth Vane pump
- Yuken Double Vane pump
- DENISON vane pump
- Yuken pressure valve
- PAKER Piston Pump
- CAT injector
- BOSCH injector
- DEUTZ injector
- CUMMINS injector
- DENSON injector
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump