Home>Products>DENSON injector>DENSON 095000-7802 injector
DENSON 095000-7802 injector
category
DENSON injector
DENSON 095000-7802 SPECIFICATIONS
DENSON 095000-7802 injector H series: Needs Analysis , DENSON injector BVC Pump Valve Co., Ltd. Manufacturing Service . Get Your Free.
- DENSON
095000-7802
- 33.0 LB
- Flange Mount
- Right Hand (CW)
- 14 gal/min @ 1200 rpm
- 1.5
- Flange
- 3/16 in
- 22
-
BVC Pump Valve Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Types of DENSON 095000-7802 injector
- 14 gpm @ 1200 rpm
- 0.875 in
- Straight w/ Key
- 21 / 1800
- 25V
- 2.32 in
- 02-102533
- Single
- None
- 1 in Code 61 Flange
- Viton
- 1800
- 2500 psi
- 21
- SAE B, 2 Bolt
- Single Shaft Seal
- Inline w/ Inlet
- 2.8
- w/o Integral Valves
DENSON 095000-7802 Specifications for DENSON 095000-7802 injector
Frequently bought DENSON 095000-7802 injector together | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | H | J | C | K | d | D | Size | Width |
713678020 | FAG | - | - | - | - | - | - | - | - |
7802 | Ruville | - | - | - | - | - | - | - | - |
PCMW 527802 E | SKF | 2 mm | 65 mm | 208 kN | 4,25 mm | 52 mm | 78 mm | 52x78x2 | 2 |
PCMW 527802 M | SKF | 2 mm | 65 mm | 315 kN | 4,25 mm | 52 mm | 78 mm | 52x78x2 | 2 |
7802R-510 | INGERSOLL RAND | - | - | - | - | - | - | - | - |
7802R-24 | INGERSOLL RAND | - | - | - | - | - | - | - | - |
PCMW 527802 B | SKF | - | - | - | - | - | - | - | - |
578020 | FAG BEARING | - | - | - | - | - | - | - | - |
7802A-105 | INGERSOLL RAND | - | - | - | - | - | - | - | - |
29502-7802 | Garlock | - | - | - | - | - | 5.1250 in | - | - |
DENSON 095000-6700 injector | Minor Diameter:33.0 LB; Max. RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); Pilot Type:14 gal/min @ 1200 rpm; Cover End RPM [Max:1.5; Port Orientation - Cover End:Flange; Port Orientation - Shaft End:3/16 in; Shaft End RPM [Max:22; Controlled Flow Rate:14 gpm @ 1200 rpm; Mounting:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-7781 injector | Shaft Type:33.0 LB; Cover End RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Model No.:14 gal/min @ 1200 rpm; Pressure Port Size, Cover End:1.5; Minor Diameter [Min:Flange; Pressure Port Size, Shaft End:3/16 in; Controlled Flow Rate:22; GPM @ 1,800 rpm, Shaft End:14 gpm @ 1200 rpm; Shaft Key:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-7172 injector | Cover End RPM [Max:33.0 LB; Minor Diameter [Min:Flange Mount; Spline Description:Right Hand (CW); Pressure Port Size, Cover End:14 gal/min @ 1200 rpm; Minor Diameter:1.5; Shaft Type:Flange; Port Orientation - Cover End:3/16 in; Seal Material:22; Integral Valve Configuration:14 gpm @ 1200 rpm; Shaft End Flow @ RPM:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-7800 injector | Max. RPM [Max:33.0 LB; Shaft Seal Type:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Cover End Pressure [Max:14 gal/min @ 1200 rpm; Pressure Port Size, Shaft End:1.5; Pressure Port Size, Cover End:Flange; Port Size:3/16 in; Shaft Length:22; GPM @ 1,800 rpm, Shaft End:14 gpm @ 1200 rpm; Major Diameter [Min:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-7801 injector | Displacement Shaft End (cu in/revolution):33.0 LB; Rotation:Flange Mount; Manufacturer Part No.:Right Hand (CW); Relief Valve Setting:14 gal/min @ 1200 rpm; Port Type:1.5; Minor Diameter [Max:Flange; Controlled Flow Rate:3/16 in; Cover End Flow @ RPM:22; Mounting Flange:14 gpm @ 1200 rpm; Pilot Type:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-6613 injector | Controlled Flow Rate:33.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pilot Type:Right Hand (CW); Spline Description:14 gal/min @ 1200 rpm; Max. RPM [Max:1.5; Port Orientation - Cover End:Flange; Port Size:3/16 in; Minor Diameter [Max:22; Cover End Flow @ RPM:14 gpm @ 1200 rpm; Shaft End Flow @ RPM:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-6980 injector | Port Orientation - Shaft End:33.0 LB; Controlled Flow Rate:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Shaft End Flow @ RPM:14 gal/min @ 1200 rpm; Shaft Length:1.5; Shaft End RPM [Max:Flange; Mounting Flange:3/16 in; Max. RPM [Max:22; GPM @ 1,800 rpm, Cover End:14 gpm @ 1200 rpm; Shaft Dia.:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-6790 injector | Model No.:33.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft Key:Right Hand (CW); Displacement Shaft End (cu in/revolution):14 gal/min @ 1200 rpm; Mounting Flange:1.5; Rotation:Flange; Shaft Dia.:3/16 in; Spline Description:22; Port Orientation - Cover End:14 gpm @ 1200 rpm; Minor Diameter:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 295900-0240 injector | GPM @ 1,800 rpm, Cover End:33.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Length:Right Hand (CW); Shaft Dia.:14 gal/min @ 1200 rpm; Shaft End Pressure [Max:1.5; Port Size:Flange; Minor Diameter [Min:3/16 in; Displacement Shaft End (cu in/revolution):22; Major Diameter [Min:14 gpm @ 1200 rpm; Controlled Flow Rate:0.875 in; Shaft Type:Straight w/ Key; GPM @ Speed:21 / 1800; Pump Series:25V; Shaft Length:2.32 in; Cartridge Kit:02-102533; Configuration:Single; Mounting Code:None; Pressure Port:1 in Code 61 Flange; Seal Material:Viton; Max. RPM [Max:1800; Pressure [Max:2500 psi; GPM @ 1,800 rpm:21; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Inline w/ Inlet; Displacement (in³/rev):2.8; Integral Valve Configuration:w/o Integral Valves; |
DENSON 095000-7802 injector Video
Contact Us
![](https://diecastminicars.com/uploaded_images/5510.jpg)
- BVC Pump Valve Co., Ltd.
- AddressZona Industriala-Vest, 5 Strada Salzburg, 25 00 SIBIU, Romania
DENSON 095000-7802 Technical Articles
Does a hydraulic pump create pressure or flow? |
What does a case drain do on a hydraulic motor? |
Why might a pump be needed in a hydraulic system? |
DENSON injector CATEGORIES
- Rexroth check valve
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- Danfoss Shut-off valves
- Rexroth Vane pump
- Yuken Double Vane pump
- DENISON vane pump
- Yuken pressure valve
- PAKER Piston Pump
- CAT injector
- BOSCH injector
- DEUTZ injector
- CUMMINS injector
- DENSON injector
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump