Home>Products>DENSON injector>DENSON 095000-7172 injector
DENSON 095000-7172 injector
category
DENSON injector
DENSON 095000-7172 SPECIFICATIONS
What BVC Pump Valve Co., Ltd. are the types of Contact Seal seal type: 0.866 in length through bore: DENSON 095000-7172 injector Standard Duty duty type: ? DENSON injector Manufacturing Service . Get Your Free, Instant price, design review.
- DENSON
095000-7172
- 75.0 LB
- Flange Mount
- Left Hand (CCW)
- 3520VQ25A11-11CC20-LH
- 3
- Flange
- N/A
- Standard Pilot
-
BVC Pump Valve Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Types of DENSON 095000-7172 injector
- 1.25 in
- 5
- 3520VQ
- 1 15/16 in
- Double
- Buna-N
- 2500
- 1.04 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 2500
- 2500
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- 1.248 in
- 1.247 in
- N/A
- N/A
- N/A
- 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
- 3520VQ25A11-11CC20-LH
- 3000
- 3000
- 16.5
- 37.5
- w/o Integral Valves
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 3/4 in Flange
- 1 1/4 in Flange
- 2.2
DENSON 095000-7172 Specifications for DENSON 095000-7172 injector
Frequently bought DENSON 095000-7172 injector together | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | O.D. | I.D. | Model | Width | Length | Weight | Casing | By-Pass |
7034/307172 | SKF | - | - | - | - | - | 0 | - | - |
571725 | FAG BEARING | - | - | - | - | - | 0 | - | - |
417172 | Timken National Seals | - | - | - | 0.500 in | - | 0.57 lbs | With Inner Case | - |
1C027172N | Donaldson | - | - | - | - | 26.46 inch (672 mm) | - | - | - |
2095000 | Donaldson | - | - | TEFC | - | - | - | - | - |
937172Q | Parker | 5.94 | 3.8 | - | - | 36.3 | - | - | None |
P571728 | Donaldson | 3.85 | 2.47 | - | - | 16.35 | - | - | None |
P571729 | Donaldson | 3.85 | 2.47 | - | - | 16.35 | - | - | None |
P571726 | Donaldson | 3.85 | 2.47 | - | - | 16.35 | - | - | None |
DENSON 095000-7802 injector | Mounting Flange:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Minor Diameter [Max:3520VQ25A11-11CC20-LH; Pressure Port Size, Shaft End:3; Manufacturer Part No.:Flange; Shaft Type:N/A; Shaft Key:Standard Pilot; Minor Diameter:1.25 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-6980 injector | Major Diameter [Min:75.0 LB; Minor Diameter [Max:Flange Mount; Relief Valve Setting:Left Hand (CCW); Shaft Length:3520VQ25A11-11CC20-LH; Port Size:3; Pressure Port Size, Cover End:Flange; Max. RPM [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Pilot Type:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-7781 injector | Port Orientation - Shaft End:75.0 LB; Model No.:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft End RPM [Max:3520VQ25A11-11CC20-LH; Shaft Key:3; Mounting:Flange; Relief Valve Setting:N/A; Pump Series:Standard Pilot; Minor Diameter:1.25 in; Mounting Flange:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-6613 injector | Shaft Seal Type:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Major Diameter [Min:3520VQ25A11-11CC20-LH; Minor Diameter [Min:3; Rotation:Flange; Relief Valve Setting:N/A; Cover End Pressure [Max:Standard Pilot; Shaft Dia.:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 295900-0240 injector | Cover End Flow @ RPM:75.0 LB; Mounting:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Pressure Port Size, Shaft End:3520VQ25A11-11CC20-LH; Displacement Cover End (cu in/revolution):3; Rotation:Flange; Major Diameter [Min:N/A; Weight:Standard Pilot; Manufacturer Part No.:1.25 in; Port Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-6700 injector | Shaft End Flow @ RPM:75.0 LB; Shaft Dia.:Flange Mount; Shaft Type:Left Hand (CCW); Relief Valve Setting:3520VQ25A11-11CC20-LH; Shaft End RPM [Max:3; Controlled Flow Rate:Flange; Port Type:N/A; Major Diameter [Min:Standard Pilot; Shaft End Pressure [Max:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-6790 injector | Integral Valve Configuration:75.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft Seal Type:Left Hand (CCW); Controlled Flow Rate:3520VQ25A11-11CC20-LH; Pressure Port Size, Shaft End:3; Port Orientation - Shaft End:Flange; Cover End Pressure [Max:N/A; Shaft Length:Standard Pilot; Max. RPM [Max:1.25 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-7800 injector | Mounting:75.0 LB; Minor Diameter [Min:Flange Mount; Pilot Type:Left Hand (CCW); Relief Valve Setting:3520VQ25A11-11CC20-LH; Minor Diameter [Max:3; Cover End Pressure [Max:Flange; Max. RPM [Max:N/A; Manufacturer Part No.:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.25 in; Model No.:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-7801 injector | Weight:75.0 LB; Cover End Pressure [Max:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Shaft End Pressure [Max:3520VQ25A11-11CC20-LH; Major Diameter [Max:3; Relief Valve Setting:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Max. RPM [Max:Standard Pilot; Shaft End RPM [Max:1.25 in; Seal Material:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A11-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):5; |
DENSON 095000-7172 injector Video
Contact Us
![](https://diecastminicars.com/uploaded_images/5510.jpg)
- BVC Pump Valve Co., Ltd.
- AddressZona Industriala-Vest, 5 Strada Salzburg, 25 00 SIBIU, Romania
DENSON 095000-7172 Technical Articles
Does a hydraulic pump create pressure or flow? |
What does a case drain do on a hydraulic motor? |
Why might a pump be needed in a hydraulic system? |
DENSON injector CATEGORIES
- Rexroth check valve
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- Danfoss Shut-off valves
- Rexroth Vane pump
- Yuken Double Vane pump
- DENISON vane pump
- Yuken pressure valve
- PAKER Piston Pump
- CAT injector
- BOSCH injector
- DEUTZ injector
- CUMMINS injector
- DENSON injector
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump